Mtd CSV 070 Uživatelský manuál stáhnout pdf (Strana 15)

Self-propelled Chipper Shredder Vacuum

5. CHIPPER BLADE REMOVAL

5.1. Disconnect H.T. lead from the spark plug.

5.2. Remove the three bolts holding the chipper

chute to the upper housing. See Figure 5.2.

5.3. Remove the black plastic nozzle as described in

the BELT AND IMPELLER REMOVAL section

of this manual. See Figure 5.3.

Figure 5.2

Chipper chute

Figure 5.3

Engine

5.4. Using 3/16” allen wrench, remove the flat head

cap screw that holds the chipper blade to the

impeller. It is accessible through the opening

created by removing the chipper chute.

See Figure 5.4.

5.5. The nuts on the flat head cap screws can be

reached using a 1/2” socket, universal, and

extension. See Figure 5.5.

NOTE: On installation, torque the chipper blade

to 210 - 250 inch pounds.

Figure 5.4

3/16 allen wrench

Figure 5.5

Impeller

1 2 ... 10 11 12 13 14 15

Žádné komentáře

Mtd CSV 070 Uživatelský manuál Strana 15