MTD 27-Ton Servisní příručka stáhnout pdf (Strana 63)

Tank and Tires

Vertical locking rod

To remove the vertical locking rod:

1. Pry the push cap off of the vertical locking rod.

See Figure 7.17.

2. Remove the spring.

3. Slide the locking rod out of the uprights on the tank.

To install the vertical locking rod:

4. Slide the locking rod through the uprights on the tank

from the engine side.

5. Slide the spring over the straight end of the locking

rod.

6. Compress the spring and hold it in that position with a

pair of locking pliers.

See Figure 7.18.

7. Install the push cap onto the end of the locking rod.

8. Release the locking pliers.

9. Test the locking rod by moving the beam from vertical

to horizontal and back a few time.

10. Test run the splitter before returning it to service.

Figure 7.17

Push cap

Spring

Figure 7.18

Locking pliers

For Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 71 72

Žádné komentáře

MTD 27-Ton Servisní příručka Strana 63