Mtd 24635A Uživatelský manuál stáhnout pdf (Strana 6)

.1 I'l •' ‘ .* ’•’ ■' ■,■'■ ■'

FIGURE 5

3. Block the frame of the unit on the left hand side.

Remove the left wheel by removing the cotter pin

and flat washer. Slide wheel off. See figure 6.

COTTER PIN

FIGURE 6

4. Using a 1/2" wrench, remove the right and left

hand side covers. See figure 7.

LEFTSIDE COVER^

^-------\—

RIGHT SIDE-

COVER

FIGURE 7

,V- -

5. Remove the 5-1/2" bolt and spacer, located on the

left hand side of unit, which act as a belt keeper.

Two 9/16" wrenches are required. See. figure 8.

FIGURE 8

6. Remove the two idler pulleys as shown in figure

9. Two 9/16" wrenches are required.

FIGURE 9

7. Hold the engagement lever in the forward positio.

(spark plug wire must be disconnected). Pull the

recoil starter rope to rotate the chain until the

master link can be located. Remove the master

link and chain. See figure 10.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Žádné komentáře

Mtd 24635A Uživatelský manuál Strana 6