Mtd 24632S Uživatelský manuál stáhnout pdf (Strana 6)

Push the release valve down and forward to release

pressure. Cylinder will return, with the aid of two

return springs. See figure 7 and copy of label below.

DOWN TO .

/^A UP TO LOCK

RELEASE /

/ 1 PUMP AND

PRESSURE ^

------

y SPLIT

—5052

FIGURE 7

MAINTENANCE

CYLINDER RESEIIVOIR

SCREW AND WASHER

SCREWDRIVER HiVNDLE

HANDLE

FIGURES

RESERVOIR OIL

1. Lift the handle on the cylinder mounting assembly

and pull cylinder assembly all the way back to the

last notch. See figure 8.

2. Remove the pump handle.

3. Release the pressure in the cylinder.

4. Tip the log splitter up so it rests on the wheels and

handle on cylinder assembly. See figure 8.

5. With a standard screwdriver, remove screw anc

washer from cylinder reservoir. See figure 8. If oil

is up to hole, do not add any oil. If not, add oil to

bring level up to hole. Oil capacity is 10 fluid

ounces. Nuto H grade 32, or Exxon L.P.

conventional #150 Hydraulic oil.

1 2 3 4 5 6 7 8 9 10 11 12

Žádné komentáře

Mtd 24632S Uživatelský manuál Strana 6