MTD 24632B Uživatelský manuál stáhnout pdf (Strana 4)

Spectrum Master™ MS2723C Specifications

MS2723C TDS PN: 11410-00524 Rev. J 3

Spectrum Analyzer

(continued)

Spectral Purity

SSB Phase Noise at 1 GHz

–100 dBc/Hz @ 10 kHz offset from carrier (–104 dBc/Hz typical)

–102 dBc/Hz @ 100 kHz offset from carrier (–107 dBc/Hz typical)

–107 dBc/Hz @ 1 MHz offset from carrier (–114 dBc/Hz typical)

–120 dBc/Hz @ 10 MHz offset from carrier (–129 dBc/Hz typical)

Amplitude Ranges

Dynamic Range

> 104 dB @ 2.4 GHz, 2/3 (TOI-DANL) in 1 Hz RBW

Measurement Range

DANL to +30 dBm

Display Range

1 to 15 dB/div in 1 dB steps, ten divisions displayed

Reference Level Range

–150 dBm to +30 dBm

Attenuator Resolution

0to65dB, 5dB steps

Amplitude Units

Log Scale Modes: dBm, dBV, dBmv, dBµV

Linear Scale Modes: nV, µV, mV, V, kV, nW, µW, mW, W, kW

Maximum Continuous Input

+30 dBm Peak, ±50 VDC (≥ 10 dB Attn)

+23 dBm Peak, ±50 VDC (< 10 dB Attn)

+13 dBm Peak, ±50 VDC (Preamp On)

Amplitude Accuracy (single sine wave input < Ref level, and > DANL, auto attenuation, Performance Sweep Mode)

20 °C to 30 °C after 30 minute

warm-up

Typical: ±0.5 dB, 100 kHz to 13 GHz

Maximum: ±1.3 dB, 100 kHz to 13 GHz

–10 °C to 50 °C after 60 minute

warm-up

Add ±1.0 dB, 100 kHz to 13 GHz

Displayed Average Noise Level (DANL) (RMS detection, VBW/Avg type = Log., Ref Level = –20 dBm for Preamp Off

and –50 dBm for Preamp On, Performance Sweep Mode)

Spurs (0 dB input attenuation, Performance Sweep Mode)

Third-Order Intercept (TOI) (–20 dBm tones 100 kHz apart, –20 dBm Ref level, 0 dB input attenuation, Preamp Off)

2.4 GHz

+15 dBm

50 MHz to 13 GHz

+20 dBm typical

P1dB

<4GHz

+5 dBm typical

4GHz to 13GHz

+12 dBm typical

Second Harmonic Distortion

50 MHz

–54 dBc

<4GHz

–60 dBc typical

>4GHz

–75 dBc typical

VSWR (> 10 dB input attenuation)

<13GHz

1:5:1 typical

DANL in 1 Hz RBW, 0 dB attenuation Preamp Off Preamp On

10 MHz to 4 GHz –141 dBm –160 dBm

> 4 GHz to 9 GHz –134 dBm –156 dBm

> 9 GHz to 13 GHz –129 dBm –152 dBm

Residual Spurs Preamp Off (RF input terminated) –90 dBm 9 kHz to 13 GHz

Preamp On (RF input terminated) –100 dBm 1 MHz to 13 GHz

Input-Related Spurs (–30 dBm input, span < 1.7 GHz) –60 dBc, –70 dBc typical

1 2 3 4 5 6 7 8 9 ... 24 25

Komentáře k této Příručce

Žádné komentáře

MTD 24632B Uživatelský manuál Strana 4

Komentáře k této Příručce

Související produkty a manuály pro Rozdělovače protokolů MTD 24632B