MTD 030 Series Návod k obsluze stáhnout pdf (Strana 12)

ChuteDeflector

NOTE: Use the hardware in Group 5 to complete the following

steps.

1. Align the holes on the chute deflector with the

corresponding holes on the deck.

2. Secure with self-tapping screws and bell washers from

underside of the deck and up through the chute deflector.

See Fig. 3-8.

Figure 3=8

RecoilStarter

NOTE: Use the hardware in Group 6 to complete the following

steps.

1. Loosely attach the rope guide to the outside of the upper

handle and thread the wing nut only a few turns. See Fig.

3-9. Do not tighten.

Figure 3-9

2. Depress the blade control.

3. Pull the recoil starter out of the engine.

4. Slip the rope through the rope guide as shown in Fig. 3-9.

Tighten the wing nut to secure the rope guide.

Adjustments

CuttingHeight

j_lklb WARNING: Always stop engine, disconnect spark

plug, and ground against engine before performing

adjustments.

Each wheel has a height adjustment lever to change the cutting

height of the mower.

1. Depress the lever towards the wheel.

2. Slide the lever assembly to desired position to change the

cutting height. See Fig. 3-10.

..................

Figure 3=10

3. Release lever towards deck.

IMPORTANT:All wheels must be placed in the same

position. For rough or uneven lawns, move the wheels to a

higher position to prevent scalping of grass.

Set-tip

Gasand 0il Fill-Up

Refer to the separate engine owner's manual for additional

engine information.

1. Add oil provided before starting unit for the first time out

of the box.

Service the engine with gasoline as instructed in the

separate engine owner's manual.

WARNING: Use extreme care when handling

gasoline. Gasoline is extremely flammable and the

vapors are explosive. Never fuel the machine

indoors or while the engine is hot or running.

Extinguish cigarettes, cigars, pipes and any other

sources of ignition.

12 I SECTION3 -- ASSErvlBLY& SET-UP

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Komentáře k této Příručce

Žádné komentáře

MTD 030 Series Návod k obsluze Strana 12

Komentáře k této Příručce

Související produkty a manuály pro Sekačky na trávu MTD 030 Series